I parked outside overnight and the next morning the brake pedal was so stiff i couldn't start the car. And i just drove it no problem an hour ago.
I don't know how i.
Honda crv not starting brake pedal stiff. Is it just the abs light? Or is the brake system warning light on, too? Have you checked the battery, particularly the terminal connections?
Another sign of this is if you only hear a click when turning the ignition key. 95% of the time, when starting. Called honda roadside assistance, but they can't tow my car until tomorrow because the dealership is closed.
The vacuum in the brake booster from when you last shut the engine off won't last forever. This is not the case however. Therefore in order to start the car you would have to really step on the pedal.
My wife called me this morning from work and said her car wont start. She got out of the car and called home. The hail finally stopped and i thought i will now park my crv on the street and do some work on chevy.
I have a 2017 honda crv and it won't start. My wife ran into similar issue too a few months ago. So i went down to take a look at it.
I always back into garage, turn off ac/radio, hit p for park, press the emergency before or just after i turn off the auto. If you shut off the engine on the car and pump the brake pedal a few times, it will bleed out (the vacuum?) and the brake becomes very stiff to press down. Encounter problem with starting the car as the brake get very stiff after the car was park after about 2 hours.
Drivers recognize a discharged or defective car battery by the fact that the starter either tries to start very slowly, clumsily or does not turn at all when trying to start. If the pedal can't move enough to activate the brake switch, the vehicle will go to accessory instead of starting when you press the start/stop button. This time, the brake depressed as it should and the car started.
Once the flow of fluid slows, close the valve. What have you tried so. She got back in the car again and tried again.
* when i turn the key to start the car all of the electronic fire up but the starter never turns (or clicks). Again, no issues, crv started just fine and i left it in the garage. My mom tried a few times and it wouldn't depress.
If it is more then this. Then something is not turning off correctly and will drain the battery prematurely. Will let you all know if they write back with anything.
Have your partner pump the brake pedal, and then repeat the. So the vacuum system was not drained and we don't know what was causing the brake to be stiff the first few times. Honda crv not starting brake pedal stiff.
This is where i got in my car and just as i hit the start button while pressing the brake, the lights flickered and the car wouldn't start. * brake lights turn on when pressing the pedal (so that i believe rules out. * the brake pedal is extremely stiff (that is what she said) and i can't depress it very far all at.
I just called the dealer and they acted like they never heard of such a thing, which is most likely bunk. The brake pedal is hard to push and when i push the start button different lights come on in the car like the abs the battery light just to name a few. When i manage to start the car, the brake pedal gets back normal.
Need to step very hard on the brake pedal before i can start the car. I have sent the american honda company an email and included this forum link to let them know that there are a fair number of us with this issue. What you are experiencing is normal for all modern cars.
The general rule is to start at the brake farthest from the master cylinder (right rear), and then work your way closer, ending with the left front. The brake pedal is hard to push and when i push the start button different lights come on in the car like the abs the battery light just to name a few. I have a brand new 2018 honda civic hatchback ex.
Open the bleed valve about a half turn, and have your partner depress the brake pedal. Pressing the pedal firmly enough to turn on the brake lights should allow it to start then you'll feel the pedal sink after the engine starts. This may be due to a battery that is in a low state of charge, which can cause the electronic brake booster (ebb) control unit to reset.
You can create the exact same condition by pressing on the brake pedal several times immediately after shutting the car off. When i tried to start the electrical is working but i'm getting warnings about checking the brake system and the brake pedal is really hard. Twice now, on two different days, i go to start it, press the brake pedal, hit start button and the brake pedal feels stiff, stuck.
Fine and mushy == has residual vacuum in the brake booster from the last time the engine was running. Just did the brake pedal test. So i went to start my car this afternoon after having already drove it to work today.
#8 · feb 23, 2019.